Part Two Small Quilted Wallhanging Tutorial

I have a small fold at the top of my piece with a fabric header above it for visual interest. You don't have to use bias as I have. A different texture fabric than your main embellished layer would add a tactile element to your finished work. If you don't want to add a header, skip steps through and baste around the edges of the four layers.

5. Below, you can see I've folded down the beaded top and pinned a piece of 1 1/4" wide bias tape right side down towards the interfacing and batting.

6. The bias is dropped from the top edge about 5/8" to 1". Use a running stitch through all layers backstitching every few stitches to anchor your work.

The red dashes below shows stitch placement.

7. The bias is dropped so that when you fold it back and pin it, the top edge of the bias or fabric is even with the top of your batting, interfacing and backing. Baste the bias at the top together through the batting and backing.




8. When you turn the edge of your cuff back, you'll stitch through the bias just above the bottom fold for a clean edge and no inner layers showing.


9. The picture below shows the stitches hidden under the fold.

Part One Small Quilted Wallhanging Tutorial

This is a tutorial on how to make a small quilted and embellished wallhanging like those in my New Orleans Blues Fetish series listed on Etsy.com. These small pieces are wonderful to brighten up a narrow wall space or hung in clusters.





1. Start your piece with a 4 1/2" X 6 1/2" top. I recommend using a sturdy fabric that can stand up to the weight of your embellishment and hold its shape after quilting. Your top can be pieced, embellished with beads or gemstones or collaged with fabric scraps, lace and ribbon. The first picture above shows the beaded piece ready to be quilted.


2. After your top is ready, cut a fabric backing, batting and interfacing the same size as your top as in picture 2 just below.



3. You'll stack your work with a layer of sew-in interfacing, batting and backing under it. The interfacing under the embellished layer doesn't show up well in the third picture. It's the edge of white just under the beaded top. Don't worry if your layers aren't exactly the same. You'll trim off the extra after they're all basted together.



4. Once together, pin the different layers together starting with the center and working towards the edges smoothing your layers as you pin.