Showing posts with label Sleeping Beauty. Show all posts
Showing posts with label Sleeping Beauty. Show all posts

Monday, October 20, 2008

Marie Antoinette's Dresses

One of paper...


And the other out of storage...

Click Here: The Curating of Marie-Antoinette's Dress
to take you to see a wonderful Podcast from the Royal Ontario Museum on the exhibit and handling of the real thing:

"Embellished with silk embroidery, ribbon appliqués, spangles and glass stones, follow the journey of Marie-Antoinette's lavish dress from ROM's vault to the gallery. Discover the delicate conservation methods, innovative mounting techniques and the mesmerizing history of the woman who once wore this dress." Royal Ontario Museum

***Updated 12-13-2008: This is no longer a current exhibit and the podcast has been archived HERE.*****

And progress on my own handwork...


Cindy's Shawl


Detail of the beaded embroidery

I did get quite a bit done on the shawl Cindy wears in part of the play, "Into the Woods". We chose a sage colored plush and an eyelet embellished soft corduroy which really does match but takes the light differently. For trim, we found this incredibly expensive organza trim with hand beading and embroidery.

Also got Sky's peach pettycoat together except for the hem and have trimmed the skirt's velvet forepart with the gold bullion trim.

Kim's fabric is prepped for her skirt and that's part of what's on the burner for today.

Thursday, October 16, 2008

Sleeping Beauty Has Sleeves


Sleeves have been set in by hand after easing the sleeve heads. Had one fitting on Sky and will get around to readjusting after the back lacing tab and zipper are in place. Ripped out one side of the skirt forepart because it was puckered and reattached it by hand this time to assure it works.

I added a simple row of the gold twist bugle beads and rocailles to the edge of the sleeve cape to tie the sleeve in with the bodice. Hand edges of pointed inner sleeve are piped and need finger rings to hold them in place. This is a very heavy sleeve!! I may have to put a tie in the upper back to keep the bodice from dragging off her shoulders!

I need to put gold bullion braid on the forepart insert and join skirt to bodice. Zipper will be hand set because this pattern doesn't call for one and it's an extra to help her dress for stage. Cindy's red calico petticoat is hanging up behind the bodice.

Tonight I finish off her shawl, cut out Kim's skirt and piece together another skirt. I also need to run a piece of elastic at the top edge of the center bodice.

I had two burglars yesterday afternoon. I left the back door wide open so George could come in and eat. She's been extra fussy lately because of the two new kittens and the visiting cats from next door. I hear this crash in the kitchen and get up from my desk to go see. I round the corner just in time to see two young raccoons dragging a plastic bag with 2 bags of cat food across the floor and headed for the back door. I told them that they could get take out when they started paying for the food.

They let go and waited for me on the porch to fill their bowls. Cheeky little buggers. I DO sometimes feel like an all-night diner with drive through. I don't mind feeding the extra guests, but they get pushy sometimes. There are two possums dining on the water side porch along with the neighbor's two cats, too.

Wednesday, October 08, 2008

The Zen of Tiaras With Florals

I'm starting on Sky's tiara to go with the Sleeping Beauty gown for the play. I'm including the first picture for artist Vikki North because she gets enthused seeing creative piles of possibilities in my gathering to start a new project. I hope it gets her going on her own sewing and making adventures in addition to her art.

There really is the base of a tiara in there! If you want to make your own fairy tiara, you'll need 16 gauge wire for your base, 20 gauge wire for the scrolls and wrapping, jewelry making pliers, and an assortment of crystals, gemstones and beads that will fit on your 20 gauge wire. I'm using gold wire to match Sky's trim on the gown.

Start with a cut length of 16 gauge wire about 34". Form a circle and join the ends by bending and wrapping, snugging up the wire with a flat nose plier. Bend your circle in half so that you have a shape that vaguely looks like the outline of a taco or half moon. (Don't you just LOVE my technical terms!)


Don't worry about it being wonky at this point. You'll stabilize the entire piece with the 20 gauge wire. I started at the center front of the tiara. Determine how tall you want the finished piece to be and cut several lengths of wire this length doubled plus an inch to allow for your swirls and curls and the wrapping at top and bottom of your basic frame.


Here's where it gets fun. Start slipping your crystals or beads on bending and coiling your 20 gauge with round nose pliers ....

(note here: My computer was taken over by a Trojan ZLOB while working on this post, published it incomplete, and caused 3 hours of down time while I fixed the thing. It should make a bit more sense now.)

....until you have a piece the width of your frame height coiled. Then wrap it on your frame top and bottom. You can get an idea of what I'm talking about in the picture above. The rough sketch behind is for another costume I'm making for the play. More pix and directions on the tiara later.



Frangipani/Lei Flower/Plumeria


Blue Skies from India


I know that many of you in the temperate climates are experiencing Autumn leaves changing color and thought that you might enjoy seeing my 'Fall' here at Dogpatch. I'm enjoying my frangipani - so fragrant it just puts you in a trance! The bottom shows one of the many living arches I have here complete with weeds. It's a vine from India and has almost covered the tree tops above my house in drifts of these gorgeous yellow-throated garlands.

If you look closely, you'll see the waterway behind my home. The ghosty gray thingy hanging beside a pannacle of flowers is Spanish Moss, ubiquitous in Florida. It was once used to stuff airplane seats with. My mother pulled moss in the swamps bordering Georgia when she was a girl in the early days of the last depression.

Tuesday, September 23, 2008

Frontispiece/Bodice Beading on Sleeping Beauty Gown


Finished frontispiece of the bodice. I quilted details into the fluer to both define it and to make it lay more flat against the chest. I'm going to bone the bodice as well. Even though it doesn't call for it, there's a lot of weight being supported here. I'm making self bias piping to outline the pieces which helps to keep the edges crisp and defined. The color is actually a deep, rich sapphire blue, but the duchesse reflects the light.

Everything else has been put on hold - sorry dear Annette! - as the deadline for the first costume reveal is the 3rd. Fast approaching deadlines! I've also felt like warmed over you-know-what the past few days and that has slowed down my work.

This is the back of the frontispiece showing the cuts where batting was stuffed and then stitched closed using trapunto, the quilting stitches, and the grid work where I laid on the plated gold twist bugle beads. Each of the individual knot is where I stitched a 3 cut Czech Charlotte size 13/0 bead. I chose a pale blue lined with copper Charlotte which will pick up the blue velvet contrast and accent the gold beads.

There's at least thirteen hours of hand work here. Lots of ripping out to keep lines and proportions equal or it would have read like op art on stage. I showed this to Cindy and she was thrilled with it. I'm pretty pleased myself.

Recommendations: Always back this kind of work. Keep your slits narrow and small on the back of trapunto work and baste them closed with a medium loose stitch to keep the front from puckering and curving. Non-quilted trapunto does better in small areas. If your design is large, quilt it or anchor it with beads.

I worked this without a frame, but would recomment one if you have issues with keeping your work flat.

Use a waxed polyester or nylon thread for your beadwork. The sharper edges of the bugles won't cut the waxed surface as quickly without the microscopic thread fibers frizzed out to catch the raw glass.

Judiciously pad areas that are to be solidly covered with beads so that the surface is almost rigid. It supports the beads better.

If you really want the beads to stand up to vigorous wear such as a beaded belt or bra for a belly dancer or stripper costume, dab a bit of fabric cement on the back on each knot. There will be a lining to hide your work and add longevity to the piece.

More later.